Instructions
Things You'll Need:
- screwdriver
-
1
Locate the screws that hold the water meter cover on. There should be two screws, one on the right and one on the left side of the cover.
-
2
Use a medium sized screwdriver to remove the two screws. The wall cover should loosen up as the screws are removed. Make sure it does not fall to the ground.
-
3
Pull the cover off the meter and set it aside. Make sure you keep the screws with the cover; this will make reattaching the cover easier.
-
4
When you are ready to put the cover back on, simply reverse the steps.